» Products

4ft Extension Pole

kate — Mon, 19 Dec 2011 17:58:09 +0000

We offer a 4ft extension pole to make any 2 piece push pole longer. They come in anodized or green finishes to match your existing pole. The extension pieces have the same male and female screw together connectors as the 2 piece poles for easy assembly.

Anchor Poles

kate — Thu, 15 Dec 2011 15:58:14 +0000

Stop where you want, not where the wind or current take you. The quickest, easiest and “stealthiest” anchoring system available – not to mention the most economical. Why spend hundreds or even thousands on electronic anchoring systems when you can have a simple to install and practical system for under $150. Leave your loud and cumbersome anchor and rope at home! Our SkinnyWater Products anchoring systems are great for multi sport applications such as duck hunting, throwing a cast net, or fishing. Our anchor poles are made of an extruded aluminum material and they float. All anchor poles have an outside diameter of 1-7/16″ and have a pointed sand head on one end and a flat cap on the other. We offer both a one piece 8ft pole and a two piece 8ft pole. Come in an anodized aluminum or green powder coat finish.

Anodized Anchor Pole[SinglePic not found]

Green Anchor Pole[SinglePic not found]

Sand Head[SinglePic not found]

IMPORTANT: Our anchor systems are made for SHALLOW water conditions. As with any anchoring system, high winds, strong currents and large/oversize boats will limit the effectiveness of an anchoring system and could result in damage or break in the anchoring system. We do not recommend staking out in more than 6ft of calm water. Learn the limits with your boat and do not operate the anchoring system in these extreme conditions. When used properly our anchoring system will last a lifetime, however; SkinnyWater Products will not be held responsible for failure or damage of this anchoring system when not used properly.

Boat Decals

kate — Wed, 18 Jan 2012 14:47:18 +0000

Get your SkinnyWater Products decals today! Our decals can be used on boats or on vehicles. Small decals 9″long X 5″tall. Large decals 12″long X 6.5″tall. Free Shipping on decals!

Casting Platform

kate — Tue, 14 Feb 2012 13:45:13 +0000

Our casting platform is made of laser cut aluminum with redfish and trout designs in each side. It has Seadek padding on top for added comfort. Dimensions: 20″ x 20″ x 19″ with a weight of 22 lbs.

Cup Holders

kate — Thu, 15 Dec 2011 17:39:38 +0000

Our aluminum cup holders come in a white powder coat finish for long lasting durability. They are available in single or double holders. Our SkinnnyWater Products cup holders are deep enough to ensure your drinks will not bounce out and are big enough to hold a large Gatorade bottle. Please note that hardware is NOT included.

Deck Mount Trolling Motor Brackets

kate — Thu, 15 Dec 2011 15:26:13 +0000

Our SkinnyWater Products Deck Mount trolling motor bracket bolts to the bow/deck of your boat. This bracket allows you to mount your trolling motor right on it and has a stake out pipe on the end for quick and easy anchoring. These brackets come with the rubber padding shown in picture. All of our anchor brackets are made of 3/8″ aluminum. The stake out pipe has an inside diameter of 1-5/8″. This bracket is universal so it can be placed on either the port or starboard side of your boat. Deck Mount Trolling motor brackets come in a black powder coat finish.

[SinglePic not found]

Flush Mounting Brackets

admin — Wed, 14 Dec 2011 21:13:14 +0000

The flush mounting bracket is made to mount directly to the front deck or bow of your boat. The anchor brackets are made of 3/8″ aluminum. The inside diameter of the anchor bracket stake out pipe is 1-5/8″. We offer a single and a double version of the Flush Mounting Bracket. The single has one pipe used for staking out and the double has both the stake out pipe as well as a pole holder pipe which holds your 8ft anchor pole while your running or can be used to hold your pole for easy access when your up on a casting platform. All anchor brackets come in your choice of a white or green powder coat finish.

Frog Gigs & Replacement Tines

kate — Thu, 15 Dec 2011 13:40:45 +0000

Our SkinnyWater Products Frog Gig is has a machines aluminum base. It comes with a 1/4″ x 2″ stainless mounting bolt and 4 replaceable Mustad tines. It has stainless steel set screws for quick and easy tine replacement. This frog gig fits perfect on one of our SkinnyWater Products gig poles. Replacement tines can also be purchased for $15.00 and come in a pack of 4.

Be sure to check out our frog gigging video below to see how well our SkinnyWater Products Frog Gigs work!

SkinnyWater Products Frog Gigging

Gaffs

kate — Thu, 15 Dec 2011 18:01:07 +0000

Our exclusive SkinnyWater Products gaffs feature a high quality 5/16″ stainless steel 3″ hook. Our aluminum gaffs are strong, lightweight and they all float. Plus, they have a milled aluminum rod gimmbles with lanyard holes that allow safe storage in any rod holder.

Gig Heads

admin — Wed, 14 Dec 2011 20:36:30 +0000

Our SkinnyWater Products Gig Heads are laser cut from 3/16″ stainless steel plate. Each gig head has a 3/8″ bolt. Our gig heads fit perfectly on our SkinnyWater Products gig poles. Be sure to check out our Frog Gigs and replacement tines also.

1 Prong Gig

3 Prong Gig

5 Prong Gig

[SinglePic not found]